一、概述：

具有室温稳定，高温（大于130度）交联等特点，因此可作为碱性体系中丙烯酸乳液与聚氨酯乳液的内添加交联剂使用。外观为白色乳液，通常制成优良的水分散体（也即阴离子分散剂）作为粘合强度增进剂、交联剂、补强剂，添加在粘合剂、各种树脂，高分子化合物等分散液或水溶液中使用，经干燥、热处理后可以有效地发挥其卓越性。粉末液可以直接添加到粉末涂料中单独使用。
物理性质
+分散液固含量为公开
+分散液粘度（25度），小于300cp
+分散液互融性：室温下与水可以任何比例互融
+沸点范围（C）：大于100（水回流）；大于130（分解）
+外观：白色分散液体
+凝固点（C）：约——5
+溶解性：DMF,DMA
+密度（20C）：1.1kg/L
+分散液PH（25C）：9-10
二、用途：
添加到印花浆中，可以有效提高印花的耐摩擦牢度与手感，而且无甲醛放出
添加到水性丙烯酸树脂与水性聚氨酯乳液中使用，热处理后可以显著提高粘合强度
添加到任何带有氨基、羧基、羟基的树脂乳液中，晶干燥、热处理后可以有效提高树脂的强度与耐摩擦度
添加到棉及涤棉处理浆中一起使用，可以提高他们的耐久拒水拒油强度
添加到丁苯类乳胶水溶性粘合剂中使用，热处理后能显著提高粘合强度
三、使用方法：
室温下比较稳定只有在温度高于130度时才会起到里交联作用：这就赋予了具有：可以长期储存并可以作为内添加交联剂使用等特点。通常情况为了操作方便配制成一种白色悬浮液使用，悬浮液添加量根据加工材料、要求的性能而异，通常比例为体系总量的1-3%，处理温度必须高于130度，温度越高处理时间越短。本固色剂白色悬浮液长时间存放时会有轻微沉降，建议摇匀后再开封使用。
四、安全毒性：
产品无味、使用时避免与酸性物质接触，避免高温：分散液时一种无味的白色悬浮液，尽量避免口、鼻吸入。
五、包装、存储期：
包装规格为15KG方铁桶，包装：避光、室温（尽可能低温）储存12个月

Other detailed information

一．Overview

It has features like stability at room temperature and high temperature(over 130℃） crosslinking ,so that it can be used as inner cross linker for acrylic emulsion and polyurethane emulsion. Appearance is white emulsion,it usually made as excellent aqueous dispersion(that is anionic dispersants)as adhesion promoter、crosslinker and reinforcing agent ,adding into adhesive,every resin and macromolecule compound dispersant or aqueous liquid.It can be affected very well after drying and heat treatment. The power fluid could add directly into powder.

Physical properties

+dispersant solid content is in public

+dispersant viscosity(25℃），less than 300cp

+dispersant solubility:at room temperature could be miscible in any ratio.

+The boiling point scope(c)larger than 100(water back);larger than 130(decomposition)

+appearance:white dispersant liquid

+freezing point(c):about ??5

+solubility: IMF,DMA

+density(20c):1.1kg/L

+dispersant liquid PH(25c):9-10

二．Usage :

Adding into printing paste,could improve the ability of adhesion and resistance to friction.

Adding into nylon paste and denim graphite paste could apparently improve the paste’s ability of resistance to friction and adhesion,but it could not affect its strength and hand feel.

Adding into water-based acrylic resin and water-based polyurethane resin,could improve the viscosity after heat pressure.

Adding into cotton and polyester cotton dealing paste,could improve the ability of washing.

Adding into ibuprofen adhesive paste ,could improve viscosity after heat pressure.

三．Method of use

It is more stable when temperature is over than 130℃ that will has a good crosslinker effect:so that it has features like longtime storage and could as inner crosslinker. In order to operate easily to make a kind of white suspension,the amount of suspension according to processing material and required performance. The usual ratio is 1-3% of all, the temperature must over 130℃，the higher temperature,the shorter time. This fixing agent store long time will have slight sedimentation,advice to shake well and use .

四．Safety and toxicity

This product without odor、when use it should not get touch with acid material,avoid high temperature;dispersant liquid is a white suspension without odor, try not to breathe.

五．Package 、shelf life

Packing specification is 15KG iron drum, shelf life: avoid sun 、room temperature (it is better under low temperature) storage 12 months.